简介General Description:
此液压动力单元由高压齿轮油泵、交流电机、多用集成块、液压阀、油箱等零部件有机结合为一体，应用于轻型升降平台、液压叉车、举升机等设备。电磁卸荷阀卸荷实现下降，下降速度由可调节流阀调节。
Consisting of high pressure gear pump,AC motor,multi-functional manifold,va**es, tank,this power unit has been widely used in the industry of logistic dev**s such as minifork lift,scissors lift and ariel wo**ng platform,The loweringmovement is co**olled by the solenoid va**e with the speed co**olled by the adjustable throttle va**e.
外型尺寸Outline Dimension: 系统工作原理Hydraulic Circuit Dia**
型号规格说明Model Specifi**ions
|
型号 Model |
电机电压 Motor Volt |
电机功率 Motor power |
名义转速 Rated Speed |
油泵排量 Displacement |
溢流阀压力 System pressure |
油箱容量 Tank Capacity |
L (mm) |
|
RBZ-F1.2A3E2/GBABU1 |
220VAC |
0.75KW |
1450RPM |
1.2mL/r |
20MPa |
3.5L |
495 |
|
RBZ-F1.6A3E2/GBABU1 |
1.6mL/r |
16MPa |
3.5L |
495 |
|||
|
RBZ-F2.1B3E2/GBABU1 |
2.1mL/r |
12MPa |
6L |
595
|
|||
|
RBZ-F1.2B4F2/GBABD1 |
380VAC |
1.1KW |
2880RPM
|
1.2mL/r |
20MPa |
6L |
|
|
RBZ-F1.6B4**/GBABD1 |
1.6mL/r |
16MPa |
6L |
||||
|
RBZ-F2.1**F2/GBABU1 |
2.1mL/r |
12MPa |
8L |
665 |
说明Remark:
1.如需不同流量的泵、压力、电机功率等系统参数，请查看液压动力单元型号说明。
1.Please go to page 1 or consult our sales engineer for the different pump displacement,motor power or tank capacity.
2.如需手动应急放油装置，请在订货时说明。
1.The manual override function is **ailable on request.
注意事项Special Notes:
1.此动力单元不可连续运转，（1分钟ON，9分钟OFF）可重复工作。
1.The power unit is of S3 duty,which can only be worked intermittentiy,ie.,1 minute on and 9 minutes off.
2.安装前必须**油缸、油管、接头等液压元件清洁无任何杂质粘附。
2.Clean all the hydraulic parts concemed before mounting the power unit.
3.液压油粘度应为15-68CST，应清洁无杂质，推荐使用N46号液压油。
3.The viscosity of the oil shoud be 15-68 cst, should be clean and free of impurities,hydraulic oil is re**mended No.N46.
4.系统使用个100小时后，应更换液压油，以后每3000小时更换一次液压油。
4.Change the oil after the first 100 hours of using the power unit,then change the oil every 3000 hours.
5.本液压动力单元适用于水平安装。
5.The power unit should be mounted horizontally.