简介General Description
此液压动力单元**为残疾人车用轮椅升降台设计，由高齿轮油泵、直流电机、多用集成块、液压阀、油箱等零部件有机组合为一体。升降台可以电动控制上升也可以手动控制上升，下降由电磁卸荷阀卸荷实现。
Consisting of high pressure gear pump, DC motor,a multi-functional manifold,va**esand a tank.Thispower unit has a power up a gr**ity down circuit.It is widely used in pallet tuck and light fork lift.
外型尺寸Outline Dimension
系统工作原理Hydraulic Circuit Dia**
型号规格说明Model Specifi**ions
|
型号 Model |
电机电压 Motor Volt |
电机功率 Motor power |
名义转速 Rated Speed |
油泵排量 Displacement |
溢流阀压力 System pressure |
油箱容量 Tank Capacity |
|
RBZ-E0.63S1T48/1 |
12VDC |
0.8KW |
2500RPM |
0.63mL/r |
12MPa |
1.5L |
|
RBZ-E0.8S1T48/1 |
12VDC |
0.8KW |
2500RPM |
0.8mL/r |
12MPa |
1.5L |
|
RBZ-E0.63S1T48/1 |
24VDC |
0.8KW |
3500RPM |
0.63mL/r |
12MPa |
1.5L |
|
RBZ-E0.8S1T48/1 |
24VDC |
0.8KW |
3500RPM |
0.8mL/r |
12MPa |
1.5L |
说明：
1.如需不同流量的泵、压力、电机功率等系统参数，请查看液压动力单元型号说明。
1.Please go to page 1 or consult our sales engineer for the different pump displacement,motor power or tank capacity.
注意事项Special Notes
1.本动力单元为S3工作制，不可连续运转，30秒开，270秒停。
1.The duty of this power unit is S3,ie.,30seconds on and 270 seconds off.
2.安装前必须**油缸、油管、接头等液压元件清洁无任何杂质粘附。
2.Clean all the hydraulic parts concemed before mounting the power unit.
3.液压油粘度应为15-68CST，应清洁无杂质，推荐使用N46号液压油。
3.The viscosity of the oil shoud be 15-68 cst.
4.系统使用个100小时后，应更换液压油，以后每3000小时更换一次液压油。
4.Change the oil after the first 100 hours of using the power unit,then change the oil every 3000 hours.
5.本液压动力单元适用于立式安装。
5.This power unit should be mounted vertically.
6.**启动运行系统时，应立即检查油箱中的油量是否充足。
6.Check the oil level in the tank after the first star of the power unit.
